7.2.1

190 Chapter15TascamFW-1884

ModeControlsSection(FW-1082only)
MasterSection
F7 Switchesencoderstoeditingofpan/surroundparametersonselected
track:angle,radius,LFE,surroundmode,X,Y.
F8 SwitchesencoderstoEQeditingonselectedtrack.SeeupperlineonSoftLCD
applicationforparameterassignment.Cursorleft/rightshiftstheparameter
bank.
F9 Switchesencoderstoplug-ineditingonselectedtrack.Cursorleft/rightshifts
parameterbank;Cursorup/downchoosesinserttoedit.
F10 Switchesencoderstoinstrumenteditingonselectedtrack.Cursorleft/right
shiftsparameterbank.
Control Assignment
Control Assignment
F1 S avestheactivesong;Thebutton’sLEDislitifthesonghasbeenedited.
SHIFT OpenstheSaveAsdialog.
F2 PerformsUndo;Thebutton’sLEDislitwhenRedoispossible.
SHIFT PerformsRedo.
F3 CopiesthecurrentselectiontotheClipboard.
SHIFT CutsthecurrentselectionandplacesitintheClipboard.
F4 PastestheClipboardcontents.
SHIFT Clearsthecurrentselection.
Control Assignment
Cursorbuttons Identicaltocomputerkeyboard’sArrowkeys—exceptwhenencodersarein
EQ,Plug-inorInstrumentEditmodes(seeabove).
SHIFT Zoominandouthorizontallyorvertically.
SHTL EnablesShuttlemodeforwheel.
Wheel Shuttlemodeoff:movesSPLbybar.
Shuttlemodeon:shuttlesSPL.
BankLEDs Showcurrentlyselectedfaderbank.IfyouonlyhaveanFW-1884,abankrefers
toeighttracks.IfyouhaveFE-8extensionsadded,abankmeanstheentire
numberofchannelstrips:16,24,andsoon.
IfnoLEDislit,abankhigherthan4isselected.
<BANK Shiftsfaderbankdownbyonebank.
SHIFT Shiftsfaderbankdownbyonetrack.
SET SwitchestoTrackview(newinplug-inversion1.20).
BANK>Shiftsfaderbankupbyonebank.
SHIFT Shiftsfaderbankupbyonetrack.
SET SwitchestoGlobalviewandshowsAux,Bus,andOutputObjects(newinplug-
inversion1.20).