7.2.1

13
 173
13 RadikalTechnologiesSAC-2K
SetUp
Pleasemakesurethatyourcontrolsurfaceisconnectedbi-directionallywiththe
computer,eitherusingaMIDIinterfaceorthebuilt-inUSBconnector.Iftheunit(s)are
connectedviaUSB,ensurethattheMIDIdrivershippedwiththeunitisinstalled.
TosetupSAC-2Kunits:
1 ChooseLogic>Preferences>ControlSurfaces>Setup.
2 ChooseNew>InstallintheSetupwindow’slocalmenu.
3 SelecttheSAC-2KintheInstallwindow.
4 ClicktheScanbutton.
AssignmentOverview
Aright-alignedmodifierbutton(suchasSHIFT)belowabuttondescriptionindicates
thatthebuttonhasanalternatemeaning/usewhileholdingdownthismodifier.
LCDsandEncoders
Control Assignment
LeftandmiddleLCDs Upperrowdisplaystracknumber(ifinaMultiChannelView)orparameter
name(ifinaChannelStripView).
Lowerrowshowstheparametervalueoftheencoderbelowthedisplay.
Levelmetersaredisplayedtotheright.
RightLCD Upperrowdisplaysthenameoftheparametereditedwiththeencoder
below.
Lowerrowdisplaystheparametervalueassignedtotheencoderbelowthe
display.
TheMasterOutputlevelmeterisdisplayedatthefarright.
Encoders EditthecorrespondingparameterdisplayedintheLCD.
Encoderpushbuttons Parameterswithtwovalues(On/Off):Switchesbetweenthetwovalues.
Parametersthataccessitems(plug-inselection):Confirmspreselection.
Atothertimes:Setsparametertodefaultvalue.