7.2.1

Chapter4EuConSupportofEuphonixMCandSystem5-MC 119
Toreturntosendeditingmode:
m PresstheBackkey.
Pan/SurroundEditingKnobset
ThisknobsetdisplaysthePanparameterunlessSurroundmodeisactiveonthetrack(s).
OntrackswhereSurroundModeisactive,thisknobsetdisplays:
 SurroundAngle
 SurroundDiversity
 LFE
 SurroundX(left/right)
 SurroundY(front/back)
 CenterLevel
PresstheBackkeytoreturntothetop-levelknobset.Pressingaknobtopsetsthe
controlledparametertoitsdefaultvalue.
GroupsKnobset
Thisknobsetdisplaysallcurrentlyusedautomationgroups.
 TheSoftKeysshowgroupnames.Presstochoosetherespectivegroup(s).
 TheOnkeydisplaysandswitchesbetweenactive/inactivegroupmembershipforthe
track.
 PressingtheBackkeyreturnstothetop-levelknobset.
OutputKnobset
IftheOutputknobsetisactive,theSoftKeysdisplayallpossibleoutputvaluesforthe
track:
 Thefirstvalueis“Surround,”thesecondis“--”,meaningnooutput.
 ThecurrentlyactiveoutputisindicatedbyalitOnkey.
 PressingtheOnkey,SoftKey,orknobtopchoosestherespectiveoutputvalue.
 Iftherearemorethaneightoutputs,youcanusetherightPagekeyoftheleftPage
keystodisplayensuingoutputs.
 Iftheselectedtrackisasurroundtrack,pressingthetwoPagekeyssimultaneously
willswitchtoSurroundOutputConfigurationmode:theSoftKeysdisplaythe
surroundformatparameters(Stereo,LCR,CenterOnly,Quadro,andsoon)ofatrack.
Again,theactivevalueisindicatedbyalitOnkeyandpressingtheOnkey,SoftKey
orknobtopchoosestherespectivevalue.
 PressingtheBackkeyreturnstothetop-levelknobset.