X

Chapter 3 ES2 88
Distortion parameters
•
Soft button: Activates the Distortion eect Soft mode. The distortion circuit sounds somewhat
like a tube overdrive.
•
Hard button: Activates the Distortion eect Hard mode. The distortion eect sounds like a fully
transistorized fuzz box.
•
Distortion knob: Rotate to set the amount of distortion. Turn this knob to zero to disable
the eect.
•
Tone knob: Rotate to control the treble portion of the distortion signal.
Chorus, Flanger, or Phaser parameters
•
When Chorus is on:
•
Intensity knob: Rotate to set the depth of the eect—how “rich” the modulation is. Turn this
knob to zero to turn o the eect.
•
Speed knob: Rotate to set the modulation rate.
•
When Flanger is on:
•
Intensity knob: Rotate to set the depth of the eect—how “cutting” the modulation is. Turn
this knob to zero to turn o the eect.
•
Speed knob: Rotate to set the modulation rate.
•
When Phaser is on:
•
Intensity knob: Rotate to set the depth of the “sweeping” eect—the width of the
modulation. Turn this knob to zero to turn o the eect.
•
Speed knob: Rotate to set the modulation rate.