X

Chapter 16 Vintage Clav 437
Use Vintage Clav Stereo Spread parameters
Unlike the original D6, Vintage Clav has a stereo output that you congure with the Stereo
Spread parameter. It is divided into two halves: Key and Pickup.
The Key parameter sets a key scale modulation of the panning position. In other words, the
played keyboard note position determines the panning position.
The Pickup parameter allows you to spread the two pickup signals across the stereo spectrum—
when both pickups are active (Upper+Lower and Upper-Lower pickup modes).
You can use both spread types at the same time. They are automatically mixed. The ring around
the Stereo Spread button graphically displays the eect of both parameters, as follows:
•
The key scale range is indicated by orange areas in the ring.
•
The pickup panning position is indicated by red lines in the ring.
Adjust the keyboard position
m Vertically drag in the upper (Key) half of the circular Stereo Spread button. The center position is
MIDI note number 60 (C3).
Set this parameter to the maximum value for extreme left/right panning (semitones) at MIDI
note number 60.
Adjust the pickup position in the stereo eld
m Vertically drag in the lower (Pickup) half of the circular button. Higher Pickup values move the
signals of both pickups away from the center position—one to the right, and the other to the left.
Set this parameter to the maximum value for extreme left/right panning.