X

Chapter 15 Vintage B3 421
Use a MIDI controller with Vintage B3
Choose a Vintage B3 MIDI control mode
MIDI controller assignments allow you to control Vintage B3 with an external MIDI controller or a
host application such as Logic Pro.
The Hardware Controller parameter determines the way Vintage B3 draw bars respond to remote
MIDI control change messages. Most users won’t need to change anything here.
If you own a MIDI draw bar organ, you’ll want to use its hardware draw bars to control Vintage
B3. Most hardware draw bar organs use an independent MIDI control change number for each
draw bar.
Choose a MIDI hardware controller
1 Click Expert in the control bar.
2 Choose a device (mode) from the Hardware Controller pop-up menu. Choose O if you do not
own a supported device and don’t want to use a special assignment mode.
•
Choose Vintage B3 MIDI mode: Roland VK or Korg CX if you use a Roland VK series or Korg
CX-3 draw bar organ as a remote controller for Vintage B3.
•
Choose Vintage B3 MIDI mode: Hammond Suzuki if you use a Hammond XB series organ as a
remote controller for Vintage B3.
•
Choose Vintage B3 MIDI mode: Native Instruments B4D if you use a Native Instruments B4D
remote controller for Vintage B3.
•
Choose Vintage B3 MIDI mode: Nord Electro if you use a Clavia Nord Electro 2 as a remote
controller for Vintage B3.
Vintage B3 MIDI mode: Roland VK or Korg CX
This table shows the MIDI controller assignments when MIDI mode is set to Roland VK or Korg
CX. Choose either setting if you use a Roland VK series or Korg CX-3 draw bar organ as a remote
controller for Vintage B3.
Controller number MIDI mode VK or CX: assigned parameter
70 draw bar 16'
71
draw bar 5 1/3'
72 draw bar 8'
73 draw bar 4'
74
draw bar 2 2/3'
75 draw bar 2'
76
draw bar 1 3/5'
77 draw bar 1 1/3'
78 draw bar 1'
Rotor Cabinet
80, 92 Slow/Brake/Fast
81 Slow/Brake
Reverb
82 Reverb Level