X

Chapter 15 Vintage B3 414
•
Range knob: Rotate to determine the sensitivity of the Wah eect to incoming MIDI
controller data.
•
Bite knob: Rotate to boost the levels of signals surrounding the cuto frequency. Bite is
eectively a lter resonance parameter, where high values makes the Wah eect sound
more aggressive.
Use an expression pedal to control the Wah eect
1 Click Options in the control bar, then set the Expression knob to a value of 0.
2 Click Eects in the control bar, then choose controller 11 from the Sweep MIDI Control
pop-up menu.
This enables control of the Wah’s cuto frequency with the expression pedal and requires no
further setup of your master keyboard. If step 1 is overlooked, the expression pedal is used to
control both Vintage B3 main volume and the Wah eect.
Note: Consult the user manual for your keyboard to learn more about use of an
expression pedal.
3 Adjust the Range knob to set the sensitivity of the Wah to incoming expression pedal
controller data.
Learn a MIDI controller to control the Wah eect
1 Click Eects in the control bar.
2 Choose Learn from the Sweep MIDI Ctrl pop-up menu.
When Learn is active, the parameter is assigned to the rst appropriate incoming MIDI data
message.
3 Move the MIDI controller on your MIDI device.
Learn mode has a 20-second time-out facility: if Vintage B3 does not receive a MIDI message
within 20 seconds, the parameter reverts to its original MIDI controller assignment.