X

Chapter 15 Vintage B3 406
•
Modwhl Temp: Switches as soon as the modulation wheel passes the center position,
regardless of whether you have moved the modulation wheel from high to low or from
low to high positions. This caters to Roland keyboards with combined pitch bend and
modulation controls.
•
Touch: Switches with aftertouch on messages. No switching occurs on aftertouch release.
•
Touch Temp: Switches with aftertouch on messages. A second switch occurs with aftertouch
release messages.
•
SusPdl Toggle: Switches when you press the sustain pedal. No switching occurs when the
sustain pedal is released.
•
SusPdl Temp: Switches when you press the sustain pedal. A second switch occurs when you
release the sustain pedal.
•
CC #18 and CC #19 Toggle: Switches when you press controller 18 or 19. No switching occurs
when either controller is released.
•
CC #18 and CC #19 Temp: Switches when you press controller 18 or 19. A second switch occurs
when you release controller 18 or 19.
Advanced Brake parameters
The advanced cabinet parameters are divided into three groups: Cabinet, Motor, and Brake. See
also Advanced Cabinet parameters and Advanced Motor parameters.
The microphone parameters are described in Vintage B3 Microphone parameters on page 408.
Brake parameters
•
Dry Level knob: Rotate to set the level of the dry signal, which can also be useful if Dry is active
for the Output switch.
•
Output switch: Choose one of two positions that modify Vintage B3 brake mode.
•
Dry: The rotor cabinet is bypassed when stopped, with a delay time of one second. This is
useful when you are using the modulation wheel to switch between fast and slow rotor
speeds. If you then switch to brake mode, the rotors are slowed down during the transition
to the dry sound.
•
Rotor: The movement of the rotor is gradually slowed down to a total stop.
•
Horn/Drum Position knobs: Rotate to set an exact stop position for the Leslie horn or drum
(bass) rotator, respectively. The original Leslie did not provide this type of control. This
occasionally resulted in a horn aimed at the back of the cabinet when it came to a halt,
leading to a mued sound.