X

Chapter 14 Ultrabeat 361
3 If you want to assign a via source, choose one of the following from the via pop-up menu.
•
Vel: Velocity is used as the via modulation source.
•
CtrlA to CtrlD: Choose one of these continuous controllers that can be assigned to four external
MIDI controllers. These assignments apply to all sounds in the current Ultrabeat plug-in
instance. See Assign Ultrabeat MIDI controllers A–D.
4 Adjust the mod and via controls.
Assign Ultrabeat MIDI controllers A–D
The MIDI Controller Assignments area enables you to assign any MIDI controller shown in the
menus to each of the four controller slots—Ctrl A, B, C, or D.
These assignments enable external MIDI controller hardware—such as sliders, knobs, aftertouch,
or the modulation wheel of your MIDI keyboard—to control via modulation sources in Ultrabeat.
Assign a controller
m Click the control menu (Ctrl A–D) that you want to assign, then choose the controller name or
number that you want to use.
Learn a MIDI controller assignment
1 Open the control menu (Ctrl A–D) that you want to assign, then choose the Learn menu item.
2 Move the controller on your MIDI keyboard or MIDI controller unit.
Note: If no suitable MIDI message is received within 20 seconds, the selected control reverts to
the previous value/assignment.