X

Chapter 14 Ultrabeat 353
Ultrabeat Output section
Ultrabeat Output section overview
Depending on the status of each Signal Flow button, the output signals of both oscillators, the
ring modulator, and the noise generator are routed to the Output section of Ultrabeat. This
routing is either direct or through the Filter and Distortion section.
The Output section passes signals through both equalizers (EQ), then on to the Pan Modulation/
Stereo Spread section (in a precongured order) before the nal level is set for the selected
sound and the trigger behavior is adjusted.
Pan modulation
Voice volume
Trigger mode controls
Two-band EQ
•
Two-band EQ: Provides precise tonal control of each drum sound.
•
Pan Modulation and Stereo Spread parameters: Pan Modulation varies the panorama position of
a drum sound. Stereo Spread broadens the stereo image.
•
Voice volume: Sets the default level of each drum sound.
•
Trigger Mode controls: Determine the way that Ultrabeat reacts to incoming MIDI notes. This is
independently dened for each sound.