X

Chapter 14 Ultrabeat 335
Ultrabeat settings
Ultrabeat settings are saved and loaded in the same way as other Logic Pro instruments.
An Ultrabeat setting contains:
•
The drum kit, which consists of 25 drum sounds, including assignment and mixer settings.
•
The complete parameter settings of all 25 sounds
•
The sequencer settings and all patterns, including step automation, trigger, velocity, and gate
information for all 25 sounds
The joint recall of all this information when loading an Ultrabeat setting is practical because the
musical eect of the patterns, especially those with sequenced gate and velocity parameters, is
often tightly tied to the tones of the sounds being used.
Note: When you save a drum kit with the Settings pop-up menu, only the location of the sample
is saved with the setting. An Ultrabeat setting doesn’t save the audio les—merely a reference to
their hard disk location. If you load a setting that contains a reference to a sample that has been
moved or erased, a dialog prompts you to specify or nd the sample. To avoid this problem, you
can use the Finder to create and manage a dedicated Ultrabeat sample folder—for all sounds
and kits.