X

Chapter 9 EXS24 mkII 196
Delete all groups that do not have a zone assignment
m Choose Group > Delete Unused Groups in the Instrument Editor.
Remap pitch bend and modulation wheel events
To create realistic-sounding performances in an easy and intuitive way, the Jam Pack 4
(Symphony Orchestra) instruments use the modulation wheel to switch between articulations—
legato, staccato, and so on. The pitch bend wheel is used to change expression—crescendo,
diminuendo, and so on. For more information, see the Jam Pack 4 documentation.
This is achieved by internally remapping pitch bend events to MIDI controller 11 and modulation
wheel events to MIDI controller 4. To ensure compatibility with the Jam Pack 4 instruments,
EXS24 mkII automatically uses this remapping behavior for Jam Pack 4 instruments.
Remap pitch bend and modulation wheel events in EXS24 mkII
m To use this remapping model for other instruments, choose Map Mod & Pitch Wheel to Ctrl 4 &
11 from the Instrument menu.
EXS24 mkII remaps incoming pitch bend and mod wheel events to controller 11 or controller 4,
respectively.
Note: The default pitch bend and modulation wheel functions cannot be used in this mode.
Edit EXS24 mkII zones and groups
Zone and group edit overview
Zones and groups oer unique parameters that enable you to customize your sampler
instrument.
You can use the zone parameters to edit the pitch, velocity range, panorama, looping parameters,
and other aspects of zones.
You can use the group parameters to adjust the velocity and output and to oset envelopes and
lters for a group of zones, for example.
Editing techniques, menu selection commands, and other parameter interactions that are shared
by zones and groups are discussed in these sections:
•
Zone and group Edit menu commands on page 202
•
Select a zone or group for editing on page 197
•
Show or hide zone and group parameters on page 200
•
Graphically edit EXS24 mkII zones and groups on page 202
For information about parameters that dier between zones and groups, see EXS24 mkII zone
parameters on page 204 and EXS24 mkII group parameters on page 207.
Note: Click the EXS24 button in the top-right corner of the Instrument Editor window to reopen
a closed Parameter window and bring it to the foreground. This button is dimmed when the
Parameter window is open.