X

Chapter 9 EXS24 mkII 166
Load sampler instruments from other locations
You can manually load sampler instruments that are not shown in the Sampler Instruments
pop-up menu. This is done using the Instrument pop-up menu in the Instrument Editor window.
1 To open the Instrument Editor window, click the Edit button in the Parameter window.
2 Choose Instrument > Open, then browse to the instrument in the dialog.
Open the Instrument Editor window
m Click the Edit button to open the Instrument Editor window.
Note: Clicking the Edit button when no sampler instrument is loaded also opens the Instrument
Editor window and automatically creates a new, empty, sampler instrument. See EXS24 mkII
Instrument Editor overview on page 189.
Search for sampler instruments
To minimize the number of sampler instruments displayed in the Sampler Instruments pop-up
menu, you can use the Find function. This limits the Sampler Instruments pop-up menu to
displaying only sampler instrument names that contain the search term.
Search for sampler instruments
1 Choose Find from the Sampler Instruments pop-up menu.
2 Enter the search term in the Filter dialog.
Disable the search lter
m Choose Clear Find from the Sampler Instruments pop-up menu.
The full Sampler Instruments pop-up menu is displayed, but the search term you typed in the
Filter dialog is not cleared. You can return to the limited menu by choosing Enable Find from the
Sampler Instruments pop-up menu. This allows you to switch between the two views without
re-typing the search term.
Perform a dierent search
m Choose Find from the Sampler Instruments pop-up menu again, then enter the search term.