9

To navigate between punch in areas
1 Press the MARKER button.
2 Press the DROP button, and when active (as indicated by the lit LED), press the FAST FWD
or REWIND button.
To set the punch in or punch out locator to the current playhead position
µ
Hold down the DROP button and press FAST FWD or REWIND. This also activates
Autopunch mode.
To quickly define a new punch in area
1 Navigate to the desired punch in locator position with the Jog/Scrub Wheel.
2 Press the DROP and REWIND buttons.
3 Navigate to the desired punch out locator position with the Jog/Scrub Wheel.
4 Press the DROP and FAST FWD buttons.
Punch View
Pressing the SHIFT and DROP buttons activates Punch view. The mode display shows
“Pu.”
To return to a regular Assignment mode, press one of the Assignment buttons.
Note: Changing a punch locator value with the Mackie Control automatically activates
Autopunch mode in Logic.
ActionControl
Shows and edits the current Autopunch status (off or on); you can
also use the DROP button.
Turning V-Pot 1
Move—moves the current punch area by a bar with each click of
the V-Pot.
Turning V-Pot 3
Picks up the current playhead position for the punch in locator.Pressing V-Pot 5
Changes the punch in locator in bars.Turning V-Pot 5
Changes the punch in locator in beats (denominator steps).Turning V-Pot 6
Picks up the current playhead position for the punch out locator.Pressing V-Pot 7
Changes the punch out locator in bars.Turning V-Pot 7
Changes the punch out locator in beats (denominator steps).Turning V-Pot 8
Mackie Control: Replace, Click, and Solo Buttons
The REPLACE button activates or deactivates Replace mode.
The CLICK button activates or deactivates the (MIDI or Klopfgeist) metronome click. There
are independent click settings for play and record. To access the click settings, choose
File > Project Settings > Metronome.
98 Chapter 3 Mackie Control