9

This way, you always revert to the channel strips you expect to find, and are comfortable
with.
Notes on Using the FADER BANKS Buttons
When holding down the OPTION button, pressing the BANK or CHANNEL LEFT button
jumps to the first set of channel strips in the project. Pressing the BANK or CHANNEL
RIGHT button jumps to the last set of channel strips in the project. For example, if your
project has 64 channel strips, pressing BANK or CHANNEL LEFT jumps to channel strips
1 through 8, and pressing BANK or CHANNEL RIGHT jumps to channel strips 57 through
64.
For views where one type of channel strip is displayed (such as audio, instruments, or
busses), Logic Pro remembers the last group of eight channel strips shown in the view,
and returns to it when you switch back from another view. For example, if you start in
a view with audio channel strips 4 through 11 visible, switch to an instruments view,
scroll to instruments 6 through 13, and then switch back to the audio channel view,
you will return to audio channel strips 4 through 11 (not 6 through 13). Switching to
the Instrument Channel view displays instruments 6 through 13.
Mackie Control: CHANNEL LEFT and CHANNEL RIGHT Buttons
Using the CHANNEL LEFT and CHANNEL RIGHT buttons, you can move up or down by a
single channel strip. Pressing the CHANNEL RIGHT button shifts (the active channel strips)
up by a single channel strip, while pressing CHANNEL LEFT shifts them down by a single
channel strip. For example, if you are viewing channel strips 1 to 8 and press the CHANNEL
RIGHT button, channel strips 2 to 9 are displayed.
Notes on Using the FADER BANKS Buttons
When holding down the OPTION button, pressing the BANK or CHANNEL LEFT button
jumps to the first set of channel strips in the project. Pressing the BANK or CHANNEL
RIGHT button jumps to the last set of channel strips in the project. For example, if your
project has 64 channel strips, pressing BANK or CHANNEL LEFT jumps to channel strips
1 through 8, and pressing BANK or CHANNEL RIGHT jumps to channel strips 57 through
64.
For views where one type of channel strip is displayed (such as audio, instruments, or
busses), Logic Pro remembers the last group of eight channel strips shown in the view,
and returns to it when you switch back from another view. For example, if you start in
a view with audio channel strips 4 through 11 visible, switch to an instruments view,
scroll to instruments 6 through 13, and then switch back to the audio channel view,
you will return to audio channel strips 4 through 11 (not 6 through 13). Switching to
the Instrument Channel view displays instruments 6 through 13.
85Chapter 3 Mackie Control