9

• Pressing a V-Pot confirms the preselected send destination, and sets the other send
parameters to their defaults.
• Cursor Up/Cursor Down switches to the next or previous Send slot.
• Cursor Left/Cursor Right switches to the next or previous send parameter. The selected
parameter appears briefly in the upper LCD row.
• Pressing a MUTE button while holding down the SHIFT button switches the current
send’s mute status.
• When Flip mode is turned on, the MUTE buttons display, and edit, the current send’s
mute status.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons.
Send Channel View
Send Channel view allows you to edit all send parameters for the selected channel strip.
The mode display shows “SE.” (for send channel strip). The upper row of the LCD shows
the name of the channel strip, the text “Sends,” the page number, and total number of
pages—“Page 1/4,” for example.
ActionControl
Edits the destination of odd-numbered sends.V-Pot 1
Edits the level of odd-numbered sends.V-Pot 2
Edits the position (pre/post) of odd-numbered sends.V-Pot 3
Sets the mute status of odd-numbered sends.V-Pot 4
Edits the destination of even-numbered sends.V-Pot 5
Edits the level of even-numbered sends.V-Pot 6
Edits the position (pre/post) of even-numbered sends.V-Pot 7
Sets the mute status of even-numbered sends.V-Pot 8
The Cursor Left and Cursor Right buttons shift between pages. The number of sends that
can be displayed simultaneously depends on the number of Mackie Control XTs you have.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons.
Alternate Send Edit Mode Options
Holding down the SEND button gives you access to a further submenu in the LCD. The
mode display shows S_ or S_., depending on whether you are in Send Mixer view or Send
Channel view.
ActionControl
Switches to Send Mixer view and selects destination.V-Pot 1 or F1
Switches to Send Mixer view and selects send level.V-Pot 2 or F2
78 Chapter 3 Mackie Control