9

ActionControl
Switches to EQ Mixer view and selects frequency.V-Pot 1 or F1
Switches to EQ Mixer view and selects gain.V-Pot 2 or F2
Switches to EQ Mixer view and selects Q.V-Pot 3 or F3
Switches to EQ Mixer view and selects bypass.V-Pot 4 or F4
Switches to EQ Channel view.V-Pot 6 or F6
Switches to Frequency/Gain Mixer view. In this mode, you can edit
the frequency and gain parameters of a specific EQ band (1 to 8)
for all channel strips.
• The mode display shows F1 to F8, indicating the selected EQ
band.
• The upper LCD row shows channel strip names.
• The lower LCD row shows the frequency of the selected EQ band.
• Turning a V-Pot changes EQ frequency.
• Pressing a V-Pot sets the EQ frequency to its default value.
• Use the Mute buttons to bypass the EQ.
• Use the faders to adjust the EQ gain.
V-Pot 7 or F7
Switches to Frequency/Gain Channel view. In this mode, you can
edit the frequency and gain parameters for all EQ bands of the
selected channel strip. Each pair of channel strips corresponds to
one EQ band.
• The mode display shows FG.
• V-Pots 1 to 8 control the frequency of EQ bands 1 to 8.
• Mute buttons 1 to 8 control the bypass of EQ bands 1 to 8.
• Faders 1 to 8 control the gain of EQ bands 1 to 8.
V-Pot 8 or F8
Note: The faders form a frequency response curve in this mode, if the EQ bands have
ascending frequency values.
Tip: You can edit another channel strip’s EQ without leaving this view by simply selecting
the channel strip in Logic Pro, or by pressing the appropriate SELECT button on the
Mackie Control.
Mackie Control: SEND Button
Pressing the SEND button activates Send Mixer view. Pressing the button repeatedly
switches between Send Mixer view and Send Channel view.
Send Mixer View
Send Mixer view allows you to edit one send parameter for all channel strips: Destination,
Level, Position, or Mute. The Send slot number, and the parameter being edited, are
displayed briefly on the LCD when switching to this mode.
• The mode display shows S1 to S8, indicating the selected Send slot.
• The upper LCD row shows channel strip names.
• Turning the V-Pots changes the current send parameter.
77Chapter 3 Mackie Control