9

• Turning the V-Pots changes the current pan/surround parameter.
• The Surround Angle parameter rotates between 0 and 359 degrees, avoiding any angle
limits.
• Pressing the button on a V-Pot sets the parameter to its default value.
• Cursor Left/Cursor Right switches to the next or previous surround parameter. The
selected parameter appears briefly in the upper row of the LCD.
Note: Ensure that the ZOOM button isn’t active when using the cursor buttons.
Pan/Surround Channel View
Pan/Surround Channel view allows you to edit all surround parameters for the selected
channel strip.
• The mode display shows “Pn” (for Pan).
• The upper LCD row shows the name of the channel strip and “Pan/Surround.”
ActionControl
Edits angle (or pan on non-surround channel strips).V-Pot 1
Edits diversity.V-Pot 2
Edits LFE level.V-Pot 3
Edits spread.V-Pot 4
Edits Surround X.V-Pot 5
Edits Surround Y.V-Pot 6
Note: The Angle/Diversity and X/Y pairs influence each other. Only the Angle/Diversity
parameters are automated and recorded.
Alternate Mode Options
Hold down the PAN/SURROUND button to display a submenu on the LCD. The V-Pots
and function keys allow you to make the following changes.
ActionControl
Switches to Pan/Surround Mixer view and selects Angle.V-Pot 1 or F1
Switches to Pan/Surround Mixer view and selects Diversity.V-Pot 2 or F2
Switches to Pan/Surround Mixer view and selects LFE level.V-Pot 3 or F3
Switches to Pan/Surround Mixer view and selects Spread.V-Pot 4 or F4
—V-Pot 5
Switches to Pan/Surround Channel view.V-Pot 6 or F5
74 Chapter 3 Mackie Control