9

AssignmentDisplay
Active if counter is displaying bars/beats/divisions/ticks.BEATS
Displays SMPTE time code or bars/beats/divisions/ticks.Counter
Displays the encoder assignment as follows: Pan, Snd1 to Snd8,
S1As to S8As, In, Out.
SELECT ASSIGN
Yamaha DM2000: TRACK ARMING Section
The following table outlines the TRACK ARMING controls and their assignments:
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier
is held down. Modifier buttons that need to be assigned manually by the user are shown
with an asterisk (*) that precedes the button name.
AssignmentModifierControl
Enables/disables the Record Enable button of the
specified channel strip.
1 to 24
Disables the Record Enable buttons of all channel
strips.
*USER 5
Disables the Record Enable buttons of all channel
strips.
MASTER
Yamaha DM2000: AUTOMIX Section
The following table outlines the AUTOMIX controls and their assignments:
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier
is held down. Modifier buttons that need to be assigned manually by the user are shown
with an asterisk (*) that precedes the button name.
AssignmentModifierControl
When DISPLAY is held down in Channel Display
mode, the display shows the automation mode
of the channel strips in the current bank selection.
DISPLAY
Sets selected channel strip, or channel strip group,
to Write automation mode. While held down, and
with the STEREO channel strip AUTO button
enabled, sets automation mode to “Write.”
REC
Sets all channel strips to Write automation mode.*USER 5
Sets selected channel strip, or channel strip group,
to Touch automation mode. While held down, and
with the STEREO channel strip AUTO button
enabled, sets automation mode to “Touch.”
ABORT/UNDO
Sets all channel strips to Touch automation mode.*USER 5
285Chapter 24 Yamaha DM2000