9

AssignmentModifierControl
Pan Assignment mode:
• Parameter control 1 button
centers pan or surround
angle.
• Parameter control 2 button
centers surround diversity.
• Parameter control 3 button
resets surround LFE level.
• Parameter control 4 button
resets spread.
Send Assignment mode:
• Enables/disables Sends 1 to 4
or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection
for Insert slots 1 to 4 or 5 to 8,
and enters Plug-in Edit mode
for the selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or
switches buttons with two
states.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 edits pan
or surround angle.
• Parameter control 2 edits
surround diversity.
• Parameter control 3 edits
surround LFE level.
• Parameter control 4 edits
spread.
Send Assignment mode:
• Controls the Send level of
Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5
to 8.
Plug-in Edit mode:
• Sets value.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Yamaha DM2000: LCD
The following table outlines the LCD assignments:
AssignmentDisplay
Active if counter is displaying SMPTE time code.TIME CODE
284 Chapter 24 Yamaha DM2000