9

AssignmentModifierControl
Switches encoder LED ring display between two
modes:
• The value of the parameter (LED off)
• Level/peak hold meters (LED on)
In Level Meter mode, the LED below the encoder
displays signal overloads (clipping).
MTR
Modifier key, used to switch the function of other
controls (see “F-KEY” entries in left column).
F-KEY
Sets Surround x/y or Panning of selected channel
to center position; LED is on if Surround X (or
Panning) is centered.
NULL
Resets overload display for level meters.F-KEY
SCRUB off: moves playhead by bars.
SCRUB on: scrubbing (of audio and MIDI).
SCRUB flashing: Shuttle mode.
Jog Wheel
Edits Surround x/y or Panning of selected channel.Joystick
Switches Jog Wheel between “Move Playhead by
Bars” (LED off) and Scrubbing (LED on) modes.
SCRUB
Sets Jog Wheel to Shuttle mode (LED flashes).SHIFT
Shifts fader bank to the left by one bank; LED is lit
if the leftmost fader bank has not been reached.
BANK –
Shifts fader bank to the left by one channel.F-KEY
Shifts fader bank to the right by one bank; LED is
lit if the rightmost fader bank has not been
reached.
BANK +
Shifts fader bank to the right by one channel.F-KEY
Sets punch in locator at the current playhead
position.
IN
Moves playhead to left cycle locator position.SHIFT
Sets left cycle locator at the current playhead
position.
F-KEY
Sets punch out locator at the current playhead
position.
OUT
Moves playhead to right cycle locator position.SHIFT
Sets right cycle locator at the current playhead
position.
F-KEY
Modifier key, used to switch the function of other
controls (see “SHIFT” entries in left column).
SHIFT
Shuttles backward.REW
240 Chapter 19 Tascam US-2400