9

AssignmentModifierControl
Switches display of Hyper Editor:
• If Hyper Editor is open, it closes.
• If Hyper Editor is closed, it opens.
F-KEY
Switches encoders to Mixer view of Send 6 level.AUX 6
Switches display of Piano Roll Editor:
• If Piano Roll Editor is open, it closes.
• If Piano Roll Editor is closed, it opens.
F-KEY
Instrument Edit View
In Instrument Edit view, the following AUX buttons have special assignments:
AssignmentControl
Scrolls parameter fader bank left by 24 parameters.AUX 1
Scrolls parameter fader bank right by 24 parameters.AUX 2
Enables/disables Bypass button of the instrument being edited.AUX 4
The AUX button LEDs show the currently selected parameter bank. AUX 2 LED is on if
parameters 25 to 48 are shown on the encoders.
Plug-in Edit View
In Plug-in Edit view, the following AUX buttons have special assignments:
AssignmentControl
Scrolls parameter fader bank left by 24 parameters.AUX 1
Scrolls parameter fader bank right by 24 parameters.AUX 2
Increments Insert slot (chooses higher-numbered slot).AUX 3
Enables/disables Bypass button of the plug-in being edited.AUX 4
Decrements Insert slot (chooses lower-numbered slot).AUX 6
The AUX button LEDs show the currently selected Insert slot. For example, AUX 2 LED is
on if Insert slot 2 is being edited.
Tascam US-2400: Master Section
The following table outlines the master section controls and their assignments:
Note: A modifier button, such as SHIFT, below a control description indicates that the
control has an alternate function or use while the modifier is held down.
239Chapter 19 Tascam US-2400