9

AssignmentControl
Sets Flip mode to Swap (LED flashing). In this
mode, the parameters controlled by the fader and
encoder are swapped.
SHIFT
Sets Flip mode to Zero—fader motors are disabled
(LED flashing).
F-KEY
Tascam US-2400: Encoder Assignment Section
The table below outlines the standard assignment of these controls:
Note: A modifier button, such as SHIFT, below a control description indicates that the
control has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Switches encoders to Channel view (see encoders’
legend); CHAN button LED is lit.
CHAN
Switches encoders to Instrument Edit view; CHAN
button LED flashes. See Instrument Edit View for
details.
F-KEY
Switches encoders to Mixer (multichannel) view
of pan controls; PAN button LED is lit.
PAN
Switches encoders to Plug-in Edit view; PAN
button LED flashes. See Plug-in Edit View for
details.
F-KEY
Switches encoders to Mixer view of Send 1 level
(for all channels).
AUX 1
Switches display of Arrange window:
• If Arrange window is open, it closes.
• If Arrange window is closed, it opens.
F-KEY
Switches encoders to Mixer view of Send 2 level.AUX 2
Switches display of Event List:
• If Event List is open, it closes.
• If Event List is closed, it opens.
F-KEY
Switches encoders to Mixer view of Send 3 level.AUX 3
Switches display of Score Editor:
• If Score Editor is open, it closes.
• If Score Editor is closed, it opens.
F-KEY
Switches encoders to Mixer view of Send 4 level.AUX 4
Switches display of Audio Bin window:
• If Audio Bin window is open, it closes.
• If Audio Bin window is closed, it opens.
F-KEY
Switches encoders to Mixer view of Send 5 level.AUX 5
238 Chapter 19 Tascam US-2400