9

AssignmentControl
Controls Send 5 level.Encoder 5 (AUX 5)
Controls Send 6 level.Encoder 6 (AUX 6)
Controls Send 7 level.Encoder 7
Controls Send 8 level.Encoder 8
Controls the Gain parameter of band 3, if a Channel or Linear Phase
EQ is inserted.
Encoder 11 (GAIN 1)
Controls the Frequency parameter of band 3, if a Channel or Linear
Phase EQ is inserted.
Encoder 12 (FREQ 1)
Controls the Q factor of band 3, if a Channel or Linear Phase is
inserted.
Encoder 13 (Q 1)
Controls the Gain parameter of band 4, if a Channel or Linear Phase
is inserted.
Encoder 14 (GAIN 2)
Controls the Frequency parameter of band 4, if a Channel or Linear
Phase is inserted.
Encoder 15 (FREQ 2)
Controls the Q factor of band 4, if a Channel or Linear Phase EQ is
inserted.
Encoder 16 (Q 2)
Controls the Gain parameter of band 5, if a Channel or Linear Phase
EQ is inserted.
Encoder 17 (GAIN 3)
Controls the Frequency parameter of band 5, if a Channel or Linear
Phase EQ is inserted.
Encoder 18 (FREQ 3)
Controls the Q factor of band 5, if a Channel or Linear Phase EQ is
inserted.
Encoder 19 (Q 3)
Controls the Gain parameter of band 6, if a Channel or Linear Phase
EQ is inserted.
Encoder 20 (GAIN 4)
Controls the Frequency parameter of band 6, if a Channel or Linear
Phase EQ is inserted.
Encoder 21 (FREQ 4)
Controls the Q factor of band 6, if a Channel or Linear Phase EQ is
inserted.
Encoder 22 (Q 4)
Controls Panning.Encoder 24 (PAN)
In CHAN mode, with the SHIFT button held down, the encoders control the following
parameters on the selected channel:
AssignmentControl
Controls Pan/Surround Angle.Encoder 1 (AUX 1)
Controls Surround Radius.Encoder 2 (AUX 2)
Controls Surround LFE (level).Encoder 3 (AUX 3)
Controls Surround Spread.Encoder 4 (AUX 4)
Controls Surround X.Encoder 5 (AUX 5)
236 Chapter 19 Tascam US-2400