9

This chapter describes how to use your Tascam US-2400 with Logic Pro.
This chapter covers the following:
• Setting Up Your Tascam US-2400 (p. 233)
• Tascam US-2400: Assignment Overview (p. 234)
Setting Up Your Tascam US-2400
Follow the steps below to use your Tascam US-2400 with Logic Pro.
To set up the Tascam US-2400 for use with Logic Pro
1 Make sure that your US-2400 control surfaces are connected to the computer via USB.
2 Ensure that the US-2400 is in Native mode. Consult your US-2400 manual for more
information on this setting.
3 Open Logic Pro.
Your control surfaces are scanned for, and installed, automatically.
233
Tascam US-2400
19