9

This chapter describes how the Tascam FW-1884, the FE-8 extension, and the FW-1082
are used to control Logic Pro. The Tascam FE-8 extension can be used to expand the
FW-1884 with eight additional channel strips. Up to 15 FE-8 units can be added to the
FW-1884 system. The Tascam FW-1082 is a stripped-down version of the FW-1884.
Note: This is an addendum to the Tascam user documentation and is limited to
descriptions of features specific to Logic Pro. Refer to the Tascam documentation for
more information about the individual control surfaces.
This chapter covers the following:
• Setting Up Your Tascam FW-1884, FE-8, and FW-1082 with Logic Pro (p. 223)
• Tascam FW-1884: Assignment Overview (p. 223)
Setting Up Your Tascam FW-1884, FE-8, and FW-1082 with
Logic Pro
Follow the steps below to use your device with Logic Pro.
To set up your device with Logic Pro
1 Set up your device as described in the Tascam user documentation.
2 Install the latest Mac OS X driver software and firmware on your computer. Visit the Tascam
website to download the most recent versions, if necessary.
3 Open Logic Pro.
Your control surface automatically connects to the application.
Tascam FW-1884: Assignment Overview
Assignments of Tascam FW-1884 interface elements to Logic functions are covered in
the following sections.
Note: The relevant devices are highlighted in the heading of each section.
• ENCODERS Section (FW-1884, FE-8)
223
Tascam FW-1884
18