9

AssignmentModifierControl
Controls volume.Fader 1 to 12
Roland SI-24: STATUS MODE Section
The following table outlines the status mode controls and their assignments:
Note: A modifier button (such as SHIFT) shown below a button description indicates that
the button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Sets STATUS 1 to 12 buttons to Automation mode.AUTOMIX
Sets all tracks to Off, Read, Latch, or Write
automation mode. Repeatedly press this button
combination to cycle through automation modes.
SHIFT
Sets STATUS 1 to 12 buttons to Record Enable
mode.
REC/PLAY
Sets STATUS 1 to 12 buttons to Solo mode.SOLO
Sets STATUS 1 to 12 buttons to Mute mode.MUTE
Roland SI-24: CH ASSIGN Controls
The following table outlines the channel assign controls and their assignments:
Note: A modifier button (such as SHIFT) shown below a button description indicates that
the button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Shows the first 12 audio input channel strips.INPUT
Shows the first 12 MIDI channel strips.SHIFT
Shows the first 12 output channel strips:
• 1: Output 1–2 (default surround assignment:
front)
• 2: Output 3–4 (default surround assignment:
rear)
• 3: Output 5 (default surround assignment:
center)
• 4: Output 6 (default surround assignment: LFE)
• 5: Output 7–8 (digital out)
OUTPUT
Shows the first 12 audio channels.SHIFT
Shows the first 12 aux channels.BUS
Shows the first 12 instrument channels.SHIFT
Switches to Arrange view and shows the first 12
channels.
Tr 1 to 12
218 Chapter 17 Roland SI-24