9

AssignmentModifierControl
Controls volume, or duplicates the parameter
assigned to the encoder above (if Flip mode is
enabled).
Faders 1 to 8
Controls the Master Level fader if it exists; if not,
controls Output 1–2 level.
Master Fader
Inserts a Channel EQ in the channel if no Channel
or Linear Phase EQ is present.
EQ button
Radikal Technologies SAC-2K: Mixer View Mode Section
The following table outlines the Mixer view mode controls and their assignments:
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate function or use while the modifier is held down.
AssignmentModifierControl
Switches to Mixer view (multichannel) pan
editing.Encoders 9 to 12 edit Pan/Angle, Diversity,
LFE, and Spread of selected channel (in Surround
mode).
Pan
Switches to Mixer view (multichannel) gain editing
of a certain EQ band. Encoders 9 to 12 edit
Frequency, Gain, Q factor, and On/Off for the
selected channel. Pressing and releasing the
button chooses a specific EQ band. While held
down, you can use Encoder 9 to choose the EQ
band that you want to edit (bands 1 to 8). The
button’s LED is lit when in Mixer view Gain Editing
mode (of the selected channel EQ band).
• Low: Band 3 (first parametric EQ band)
• LowMid: Band 4 (second parametric EQ band)
• HiMid: Band 5 (third parametric EQ band)
• High: Band 6 (fourth parametric EQ band)
High, HiMid, LowMid,
Low
Switches the four Snd/Ins (1 to 4) buttons between
Send and Insert modes.
• LED off: Send mode
• LED on: Insert mode
Snd/Ins
207Chapter 15 Radikal Technologies SAC-2K