9

• V-Pot 3 (labeled Move) moves the current cycle area by a bar with each click of the
V-Pot, when turned.
• V-Pot 4 moves the current cycle area by a beat with each click of the V-Pot, when turned.
• The display shows the left and right locators above V-Pots 5 and 7.
• Pressing V-Select 5 picks up (uses) the current playhead position for the left locator.
• Turning V-Pot 5 changes the left locator position by bars.
• Turning V-Pot 6 changes the left locator position by beats (denominator steps).
• Pressing V-Select 7 picks up (uses) the current playhead position for the right locator.
• Turning V-Pot 7 changes the right locator position by bars.
• Turning V-Pot 8 changes the right locator position by beats (denominator steps).
To activate Cycle View mode
µ
Hold down the CHAN STRIP button, and press V-Select 31.
Mackie C4: Punch View Mode
In Punch View mode, the V-Pots/V-Selects behave as follows:
• V-Pot/V-Select 1 shows and edits the current Autopunch status (off or on).
• V-Pot 3 (labeled Move) moves the current punch in locator by a bar with each click of
the V-Pot, when turned.
• V-Pot 4 moves the current punch in locator by a beat with each click of the V-Pot, when
turned.
• The display shows the punch in and punch out locators above V-Pots 5 and 7.
• Pressing V-Select 5 picks up (uses) the current playhead position for the punch in
locator.
• Turning V-Pot 5 changes the punch in locator position by bars.
• Turning V-Pot 6 changes the punch in locator position by beats (denominator steps).
• Pressing V-Select 7 picks up (uses) the current playhead position for the punch out
locator.
• Turning V-Pot 7 changes the punch out locator position by bars.
• Turning V-Pot 8 changes the punch out locator position by beats (denominator steps).
Note: Changing a punch locator position with the C4 automatically activates Autopunch
mode.
To activate Punch View mode
µ
Hold down the CHAN STRIP button, and press V-Select 32.
198 Chapter 14 Mackie C4