9

To edit invisible parameters
µ
Press the BANK Left/BANK Right or SINGLE Left/SINGLE Right buttons to change the
parameter shown, and edited, in row 4.
The parameters shown in rows 1 to 3 are adjusted accordingly.
To access Channel Strip view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 17.
Mackie C4: EQ Mixer View Mode
In EQ Mixer view:
• Row 1 sets the selected EQ band bypass state.
• Row 2 edits the selected EQ band frequency.
• Row 3 edits the selected EQ band gain/slope.
• Row 4 edits the selected EQ band Q factor.
• The SLOT UP and SLOT DOWN buttons select the EQ band (if a Channel or Linear Phase
EQ is inserted in the selected channel strip).
To access EQ Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 19 (labeled EQ Mixer).
Mackie C4: EQ Channel View Mode
In EQ Channel view:
• Row 1 edits the frequency of all eight bands.
• Row 2 edits the gain/slope of all eight bands.
• Row 3 edits the Q factor of all eight bands.
• Row 4 sets the bypass state of all eight bands.
If no Channel or Linear Phase EQ is present on the selected channel, a Channel EQ is
automatically inserted when you enter the EQ Channel view. The TRACK Left and TRACK
Right buttons switch to the previous or next channel. If you switch to a channel with no
Channel or Linear Phase EQ inserted, the C4 displays show “–”, and the corresponding
V-Pots do nothing.
To access EQ Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
194 Chapter 14 Mackie C4