9

• Mackie C4: Cycle View Mode
• Mackie C4: Punch View Mode
Mackie C4: Pan/Surround Mixer View Mode
In Pan/Surround Mixer view:
• Row 1 edits pan/surround parameter 1.
• Row 2 edits pan/surround parameter 2.
• Row 3 edits pan/surround parameter 3.
• Row 4 edits pan/surround parameter 4 (in this order: pan/angle, diversity, LFE, spread,
X, Y).
SINGLE Left/Right changes the parameter edited in row 1, thus affecting the parameters
shown (and edited) in rows 2 to 4.
To access Pan/Surround Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 18 (labeled Surrnd Mixer).
Mackie C4: Pan/Surround Channel View Mode
In Pan/Surround Channel view, row 1 edits all eight surround parameters of a surround
channel. If a stereo or mono channel is selected, V-Pot 1 edits the Pan (or Balance)
parameter.
To access Pan/Surround Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 26 (labeled Surrnd).
Mackie C4: Channel Strip Mixer View Mode
In Channel Strip Mixer view, the row order is reversed, so that the lowest row edits
parameter 1.
V-Pot row 4 (bottom row) edits the currently chosen channel parameter. Row 3 edits
channel parameter 2, row 2 edits channel parameter 3, and row 1 (at the top) edits channel
parameter 4.
The V-Pots edit the following channel parameters in this order: volume, pan/angle, input
format, input assignment, output assignment, automation mode, group, displayed
automation parameter.
193Chapter 14 Mackie C4