9

AssignmentModifierControl
Displays the V-Pot assignment as follows: Pan,
Snd1 to Snd8, S1As to S8As, In, Out.
SELECT-ASSIGN
—SUSPEND
Hold this button down to switch the V-Select
buttons between standard operation and setting
default values.
DEFAULT
When V-Pots display a send level, the ASSIGN
button switches them to Send Destination
Assignment mode (choosing a bus, in other
words). Press the V-Select to confirm the
assignment. The DSP V-Pots display the
assignments of Send slots 1–4 or Send slots 5–8.
Confirm any changes by pressing the V-Select
button or all changes will be lost when you leave
Send Destination Assignment mode, or press the
Assign button a second time.
ASSIGN
Mackie HUI: Fader Bank Buttons
The following table outlines the fader bank controls and their assignments:
AssignmentControl
Shifts channel strips by one bank (a group of channel strips or
parameters) to the left.
Bank Left
Shifts channel strips by one bank to the right.Bank Right
Shifts channel strips by one channel (or parameter) to the left.Channel Left
Shifts channel strips by one channel to the right.Channel Right
Mackie HUI: WINDOW Section
The following table outlines the window controls and their assignments:
AssignmentControl
Opens or closes the Transport bar window.TRANSPORT
Opens or closes the Arrange window.EDIT
Opens or closes the Mixer.MIX
Opens or closes the Sample Editor.ALT
Opens or closes the Audio Bin.STATUS
Opens or closes the Marker List.MEM-LOC
Mackie HUI: KEYBOARD SHORTCUTS Section
The following table outlines the keyboard shortcut controls and their assignments:
180 Chapter 13 Mackie HUI