9

AssignmentModifierControl
Sets punch in locator by current playhead position.SHIFT
F6
Sets punch out locator by current playhead
position.
SHIFT
Sets pots to Pan/Send mode (display shows “PA”).F7
Enables/disables metronome click.SHIFT
Sets pots to Instrument Edit mode (display shows
“In”).
F8
Sets pots to Effect Edit mode (display shows
“P1”–“P9”).
F9
JLCooper CS-32 MiniDesk: Cursor Section
The following table outlines the cursor controls and their assignments:
Note: If a modifier button, such as SHIFT, is shown below a description, it indicates that
the control has an alternate use while the modifier is held down.
AssignmentModifierControl
Zooms out vertically.Up
In Effect Edit mode: moves up one Insert slot
(unless top slot is selected).
SHIFT
Zooms in vertically.Down
In Effect Edit mode: moves down one Insert slot
(unless bottom slot).
SHIFT
Zooms out horizontally.Left
In Instrument and Effect Edit modes: decrements
current parameter bank (moves down one bank,
or page, of parameters).
SHIFT
Zooms in horizontally.Right
In Instrument and Effect Edit modes: increments
current parameter bank (moves up one bank, or
page, of parameters).
SHIFT
JLCooper CS-32 MiniDesk: Transport Section
The following table outlines the transport controls and their assignments:
AssignmentControl
RecordRECORD
StopSTOP
Moves playhead backward by one bar.REW
158 Chapter 8 JLCooper CS-32 MiniDesk