9

Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2 Press both Page keys simultaneously to switch to Send Configuration mode.
The eight Send slots of the currently selected channel strip are displayed.
3 Select the Send slot you want by pressing the respective knob top.
The first eight send destinations are displayed. You can use the Page keys to display
further send destinations (busses).
4 Choose the send destination:
• Pressing the knob top changes, or sets, a selected destination.
• Pressing the Back key navigates up one level in the menu hierarchy.
Euphonix: Using the Pan/Surround Knobset
This knobset allows you to adjust a channel strip’s Pan/Surround control. If the channel
strip’s input format is set to Surround, the knobset displays the following parameters:
• Surround Angle
• Surround Diversity
• LFE Level
• Surround X (left/right)
• Surround Y (front/back)
• Spread
• Center Level
To adjust the pan/surround control
1 Press the Pan/Surround knob top, or key, to display the Pan/Surround parameters for the
currently selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The parameter names are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
2 Turn the respective knob to change the parameter value.
Pressing a knob top sets the controlled parameter to its default value.
3 Press the Back key to return to the top-level knobset.
Euphonix: Using the Group Knobset
This knobset allows you to edit a channel strip’s group membership.
To add a channel strip to a group
1 Press the Group knob top, or key, to display the list of groups that the currently selected
channel strip is assigned to. This key is labeled Grp on the CM408T channel strip.
136 Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport