9

Euphonix: Understanding the Controls Available for Each EQ Band
This section outlines the addressing and control of EQ bands with the MC Professional
and MC Mix devices.
• The first knob of an EQ band (the upper or left knob of the pair) controls either
Frequency or Q. To switch between Frequency and Q, use the Select/SEL key if working
with the MC Professional devices or the MC Mix. If using the MC Control, press the Shift
key while touching the knob’s image on the touchscreen. (When active, a small yellow
LED lights on the upper left of the image.) Pressing the knob top sets the controlled
parameter to its default value.
• The second knob of an EQ band (the lower or right knob of the pair) controls Gain (or
Slope). Pressing the knob top sets the controlled parameter to its default value.
• If working with the MC Professional devices or the MC Mix, the On key switches the
bypass state of the band. On the MC Control, press the knob’s touchscreen image.
Euphonix: Using the Aux or Sends (Configuration) Knobset
The Aux or Sends (Configuration) knobset allows you to:
• Edit a send destination (Aux or Sends mode)
• Change or set a send destination (Aux or Sends Configuration mode)
The Select key (labeled SEL on the MC Mix) switches between Pre Fader (off—unlit) and
Post Fader (on—lit) modes.
Editing Send Destinations
You edit send destinations in Aux/Sends mode, using the Aux/Sends knobset.
To edit a send destination
1 Press the Aux or Sends knob top, or key, to display all send options for the currently
selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The send options are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
2 Turn the respective knob to change the send level.
Pressing a knob top sets the controlled parameter to its default level.
3 Press the Back key to return to the top-level knobset.
Changing or Setting Send Destinations
You change or set send destinations in Aux/Sends Configuration mode, using the
Aux/Sends Configuration knobset.
To change or set a send destination
1 Press the Aux or Sends knob top, or key.
135Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport