9

2 Press both Page keys simultaneously to switch to Input Configuration mode.
The Logic Pro Instruments Plug-in menu appears. Press the Page keys to display ensuing
plug-ins.
If an instrument plug-in is already inserted, the On key is lit (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left
of the knob image.
3 Choose the instrument you want:
• Pressing the knob top activates a submenu or inserts a selected instrument plug-in.
• Pressing the Back key navigates up one level in the menu hierarchy.
Euphonix: Using the EQ Knobset
This knobset allows you to edit the first Channel or Linear Phase EQ inserted in the selected
channel strip.
There are two pages, each showing four EQ bands on eight knobs:
• One page contains the parameters of EQ bands 1, 2, 7, and 8.
• One page contains the parameters of EQ bands 3, 4, 5, and 6.
When no Channel or Linear Phase EQ is present on the selected channel strip, pressing
the knob top labeled AddChEQ inserts a Channel EQ.
To edit an EQ plug-in
1 Press the EQ knob top, or key, to display the EQ bands of the EQ plug-in inserted in the
currently selected channel strip.
Note: The MC Mix automatically switches to Channel mode.
The EQ band parameters are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
You can use the Page keys to display ensuing parameters.
2 Turn the respective knob to change the parameter value.
Pressing a knob top sets the controlled parameter to its default value.
3 Press the Back key to return to the top-level knobset.
134 Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport