9

• “Close plug-ins on workstation when exiting” closes the plug-in window.
Euphonix: Getting to Know Knobsets
When using the Euphonix devices with Logic Pro, the Mixer’s channel strip functions can
be accessed and edited using knobsets. A knobset contains pages, each comprised of
eight parameters. Knobsets are organized hierarchically.
The top-level knobset leads to the following knobsets:
• Inserts: Pressing the Inserts knob top displays all effect plug-ins inserted in the currently
selected channel strip. (See Euphonix: Using the Inserts (Configuration) Knobset.) If a
plug-in is enabled (and does not belong to the dynamic, EQ, or filter plug-in groups)
either the On key is lit (MC Pro and MC Mix) or the knob’s image shows a small green
LED on the lower left (MC Control). To switch the bypass state, press the respective On
key or knob image, or the Ins In key on the CM408T channel strip.
• Input: Pressing the Input knob top displays all possible channel input values for the
selected channel strip. (See Euphonix: Using the Input (Configuration) Knobset.)
• Dyn: The Dyn knob top is not currently used to display a list, or allow editing, of dynamic
plug-ins. If a dynamic plug-in is enabled, either the On key is lit (MC Pro and MC Mix)
or the knob’s image shows a small green LED on the lower left (MC Control). To switch
the bypass state, press the respective On key or knob image, or the Dyn In key on the
CM408T channel strip.
• EQ: Pressing the EQ knob top switches to EQ editing mode. (See Euphonix: Using the
EQ Knobset.) If an EQ plug-in is enabled, either the On key is lit (MC Pro and MC Mix)
or the knob’s image shows a small green LED on the lower left (MC Control). To switch
the bypass state, press the respective On key or knob image, or the EQ In key on the
CM408T channel strip.
• Aux or Sends: Pressing the Aux or Sends knob top switches to send editing mode. See
Euphonix: Using the Aux or Sends (Configuration) Knobset. If an Aux or Send is enabled,
either the On key is lit (MC Pro and MC Mix) or the knob’s image shows a small green
LED on the lower left (MC Control). Pressing the respective On key or knob image
switches the bypass state.
• Pan: Pressing the Pan knob top switches to pan/surround editing mode. (See Euphonix:
Using the Pan/Surround Knobset.)
• Group: Pressing the Group knob top switches to group editing mode. (See Euphonix:
Using the Group Knobset.)
• Mix or Output: Pressing the Mix or Output knob top switches to output editing mode.
(See Euphonix: Using the Mix or Output Knobset.)
130 Chapter 5 Euphonix MC Pro, System 5-MC, MC Control, MC Mix, and MC Transport