8

Chapter 3 Mackie Control 93
Replace
Activates/deactivates Replace mode.
Click
Enables/Disables the (MIDI or Klopfgeist) metronome click. There are independent click
settings for play and record. The click settings are determined in File > Project Settings
> Metronome.
Pressing the SHIFT and CLICK buttons activates/deactivates both External Sync mode
and transmission of MMC.
Solo
The SOLO button behaves as per the Solo key command. Individual channels can be
soloed via the channel SOLO buttons of each channel strip. MIDI or audio regions can
be selected, and soloed, along with the selected channels. Each channel features an
independent SOLO LED, which is lit when a channel strip is soloed. The RUDE SOLO
LED—just to the right of the Position/Time display—is lit whenever any channel strip is
soloed.
Pressing the SHIFT and SOLO buttons enables Solo Lock mode.
Cursor Key Zone
These five buttons, located to the left of the Jog/Shuttle wheel, serve a number of
purposes. The four cursor buttons, Up, Down, Left and Right, encircle the central ZOOM
button.
Normal Operation
When the ZOOM button is not active (its LED is unlit), the four cursor buttons select the
current parameter, shift the current parameter page or Send/EQ/Insert slot, depending
on the current V-Pot assignment.
When holding down the OPTION button, the Cursor Left/Right buttons scroll to the
first/last page, and the Cursor Up/Down buttons scroll to the first/last slot.
When holding down the x/Alt button, the Cursor Left/Right buttons shift the
parameter display by one parameter, rather than one page.
In view modes which don’t require page or slot shifts, the Cursor buttons emulate the
computer keyboard’s cursor keys. Example: Mixer view.
In Large and Temporary Nudge mode, the Cursor Left/Right buttons emulate the
computer keyboard’s cursor keys, allowing easy region or event selection.