8

218 Chapter 19 Yamaha 01V96
Channel Display Mode
SELECTED CHANNEL Section
Pressing Rotary
controls 1 to 4
Pan Assign mode:
 Rotary control 1 centers pan or surround Angle.
 Rotary control 2 centers surround diversity.
 Rotary control 3 centers surround LFE (level).
 Rotary control 4 sets spread to its default value.
Send Assign mode:
 Enables/disables Sends 1 to 4 or Mutes 5 to 8.
Effect Assign mode:
 Confirms the effect selection for Insert slots 1 to 4 or 5 to 8, and enters Effect
Edit mode for the selected Insert slot.
Effect Edit mode:
 Sets value to default, or toggles buttons with two states.
Moving rotary
controls 1 to 4
Pan Assign mode:
 Rotary control 1 edits Pan or Surround Angle.
 Rotary control 2 edits Surround Diversity.
 Rotary control 3 edits Surround LFE.
 Rotary control 4 edits Spread.
Send Assign mode:
 Controls the send level of Sends 1 to 4 or 5 to 8.
Effect Assign mode:
 Chooses Insert slot 1 to 4 or 5 to 8.
Effect Edit mode:
 Sets value.
Display Assignment
Control Assignment
Moving parameter
controls 1 to 16
Adjusts parameter selected in the FADER MODE section.
Pressing parameter
controls 1 to 16
When Send 1 to 8 is selected: Edits send pre/post fader position, enables or
disables send mute, or sets send level to default value.
Send, Input, or Output Assignment mode: Confirms selection.
Control Assignment
Pan control Adjusts parameter selected in the FADER MODE section.