8

Chapter 17 Tascam US-2400 207
Master Channel
Encoder Assignment Section
This is the standard assignment of these buttons:
Control Assignment
SEL Selects Master Output channel strip (if it exists—if not, Output channel 1-2 is
selected).
CLR SOLO Disables Solo for all tracks/channels.
SHIFT Disables Mute for all tracks/channels.
F-KEY Disables the Record Enable buttons of all tracks/channels.
FLIP Switches Flip mode between Off (LED off ) and Duplicate (LED on).
In this mode, the fader of each channel strip mirrors the encoder function.
SHIFT Sets Flip mode to Swap (LED flashing).
In this mode, the parameters controlled by the fader and encoder are
swapped.
F-KEY Sets Flip mode to Zero—fader motors are disabled (LED flashing).
Control Assignment
CHAN Switches encoders to Channel view (see encoders’ legend)—CHAN button LED
is lit.
F-KEY Switches encoders to Instrument Edit view—CHAN button LED flashes. See
“Instrument Edit View” on page 208 for details.
PAN Switches encoders to Mixer (multi channel) view of pan controls—PAN button
LED is lit.
F-KEY Switches encoders to Plug-in Edit view—PAN button LED flashes. See “Plug-in
Edit View” on page 208 for details.
AUX 1 Switches encoders to Mixer view of Send 1 level (for all channels).
F-KEY Switches display of Arrange window:
 If Arrange window is open, will be closed.
 If Arrange window is closed, it will be opened.
AUX 2 Switches encoders to Mixer view of Send 2 level.
F-KEY Switches display of Event List:
 If Event List is open, it will be closed.
 If Event List is closed, it will be opened.
AUX 3 Switches encoders to Mixer view of Send 3 level.
F-KEY Switches display of Score Editor:
 If Score Editor is open, it will be closed.
 If Score Editor is closed, it will be opened.
AUX 4 Switches encoders to Mixer view of Send 4 level.
F-KEY Switches display of Audio Bin window:
 If Audio Bin window is open, it will be closed.
 If Audio Bin window is closed, it will be opened.
AUX 5 Switches encoders to Mixer view of Send 5 level.