8

186 Chapter 14 Radikal Technologies SAC-2K
Software Navigation Section
Group Switches to Group editing mode:
 Encoder 1 to 10 push buttons edit a group property (the property is shown
in the LCD’s lower line).
 Encoder 11 scrolls through group properties.
 Encoder 12 selects a group to edit. Its name is displayed in the lower LCD
line, above Encoder 12.
 Select buttons 1 to 8 activate/deactivate group membership of the
channel.
1 to 8 Shifts the fader bank (a group of channels or parameters) to the left, by one
bank.
9 to 16 Shifts the fader bank to the right, by one bank.
17 to 24 Shifts the fader bank to the left, by one channel.
25 to 32 Shifts the fader bank to the right, by one channel.
Control Assignment
Control Assignment
1 Num LED off: —
Num LED on: Equivalent to ‘1’ on computer keyboard.
2 Num LED off: Equivalent to Left Arrow key on computer keyboard.
Num LED on: Equivalent to ‘2’ on computer keyboard.
3 Num LED off: Equivalent to Up Arrow key on computer keyboard.
Num LED on: Equivalent to ‘3’ on computer keyboard.
4 Num LED off: Equivalent to Right Arrow key on computer keyboard.
Num LED on: Equivalent to ‘4’ on computer keyboard.
5 Num LED off: Performs Undo (of most recent editing operation).
Num LED on: Equivalent to ‘5’ on computer keyboard.
6 Num LED off: —
Num LED on: Equivalent to ‘6’ on computer keyboard.
7 Num LED off: Copies the selection (of regions or events).
Num LED on: Equivalent to ‘7’ on computer keyboard.
8 Num LED off: Equivalent to Down Arrow key on computer keyboard.
Num LED on: Equivalent to ‘8’ on computer keyboard.
9 Num LED off: Pastes the Clipboard contents.
Num LED on: Equivalent to ‘9’ on computer keyboard.
0 Num LED off: Saves the project.
Num LED on: Equivalent to ‘0’ on computer keyboard.
Num Switches the numeric buttons between primary and secondary function (see
above).
Enter Equivalent to Enter key on the computer keyboard.