8

Chapter 13 Mackie HUI 177
DSP EDIT/ASSIGN Section
Control Assignment
ASSIGN —
COMPARE Switches DSP display between “track name/parameter name” and “parameter name/
parameter value” modes.
BYPASS Switches the bypass state of the plug-in being edited.
DSP Select 1 to
4
Assignment Pan mode
 DSP Select 1 resets pan or surround angle.
 DSP Select 2 resets surround diversity.
 DSP Select 3 resets surround LFE (level).
 DSP Select 4 resets the Spread parameter.
Assignment Send mode
Activates or deactivates Sends 1 to 4, or Mutes 5 to 8.
Effect Assign mode
Confirms Insert 1 to 4 or 5 to 8 effect selection, selects this Insert slot, and enters
Effect Edit mode—showing the parameters of the chosen effect.
Effect Edit mode
Sets parameter the default value, or turns “switch” parameters on/off.
DSP V-Pots Assignment Pan mode
 DSP V-Pot 1 controls pan or surround angle.
 DSP V-Pot 2 controls surround diversity.
 DSP V-Pot 3 controls surround LFE (level).
 DSP V-Pot 4 controls the Spread parameter.
Assignment Send mode
Controls Send 1 to 4, or 5 to 8 Levels.
Effect Assign mode
Assigns effects to Insert slots 1 through 4, or 5 to 8.
Effect Edit mode
Controls the selected effect parameter.
INSERT/PARAM Switches between Effect Assign and Effect Edit modes.
SCROLL Effect Edit mode: Shifts parameter display by the number of DSP V-Pots in the
control surface group (usually four).
x/ALT/FINE Effect Edit mode: Shifts parameter display by one (parameter).