8

132 Chapter 6 CM Labs Motormix
Multi Buttons
These buttons (labelled A to H) have multiple uses, depending on the current mode, as
indicated by the green and yellow LEDs to the right.
Note: In modal dialogs, the Multi buttons generate the computer keyboard character
shown on the button face.
Rotary
Selector
Selects a slot or parameter for rotary encoders, depending on the parameter types
being edited with the rotary encoders:
 Send slot when editing send level or assigning send destination.
 EQ band when editing an EQ parameter.
 Effect/Instrument slot when assigning an effect or instrument.
 Pan/Surround parameter when editing a Pan/Surround parameter.
 Channel parameter when editing a channel parameter.
 Effect/instrument parameter page when editing an effect or instrument plug-in.
Rotary
Selector
push button
Switches Flip mode between Off and Duplicate (faders mirror the rotary encoder
assignments).
SHIFT Switches the channel strip display mode between:
 Page info in upper line, parameter name in lower line.
 Parameter name in upper line, parameter value in lower line.
Control Assignment
Mode Assignment
fx bypass Enables/disables bypass of currently selected insert effect.
SHIFT (eff-1) Enables/disables bypass of currently selected EQ band, and switches rotary encoders to
EQ frequency editing.
s-mute Enables/disables bypass of currently edited send, and switches rotary encoders to send
level editing.
SHIFT (eff-2) Enables/disables bypass of currently selected EQ band, and switches rotary encoders to
EQ Gain editing.
pre/post Switches between pre and post-fader modes of currently edited send, and switches
rotary encoders to send level editing.
Post mode is indicated by a lit LED.
SHIFT (eff-3) Enables/disables bypass of currently selected EQ band, and switches rotary encoders to
(EQ) Q factor editing.
select Switches rotary encoders to Pan/Surround editing. The parameter is chosen with the
rotary selector.
SHIFT (eff-4) Switches rotary encoders to channel parameter editing.