8

Chapter 6 CM Labs Motormix 131
Note: In modal dialogs, the Select buttons generate the computer keyboard character
shown on the button face.
Rotary Pots
Instrument
Assign mode
Enters Instrument Edit mode for the selected (instrument) channel.
Instrument
Edit mode
Enables/disables the selected parameter, or resets it to the default value.
Mode Assignment
Control Assignment
Rotary pots
1 to 8
Control parameter chosen with the Rotary Selector, as displayed in the 7 segment
display (see below).
7 segment
display
Shows current selection for rotary pots:
Send/EQ editing (S-MUTE or PRE/PST LED is on):
 S1 to S8 = Send 1 to 8 level
 F1 to F8 = EQ band 1 to 8 frequency
 G1 to G8 = EQ band 1 to 8 gain
 q1 to q8 = EQ band 1 to 8 Q factor
Pan/Surround editing (select LED is on):
 Pn = Pan
 An = Surround Angle
 dv = Surround Diversity
 FE = Surround LFO
 Sp = Surround Spread
 X = Surround X
 Y = Surround Y
Channel parameter editing (eff-4 LED is on):
 VL = Volume
 Pn or An = Pan/Surround Angle
 FM = Channel input format
 In = Channel input assignment
 Ou = Channel output assignment
 Au = Automation mode
 Gr = Group membership
Assignment:
 d1 to d8 = Assign Send 1 to 8 destination
Effect editing (DSP/compare LED is on):
 P1 to 15 = Assign Insert slot 1 to 15 to effect.
 P1. to 15. = Effect parameter editing
Instrument editing (DSP/compare LED is on):
 IA = Assign instrument to Instrument slot.
 IE. = Instrument parameter editing
Group property editing (group LED is on):
 G1 to 32 = group number