8

Chapter 5 EuCon Support of Euphonix MC and System 5-MC 125
Sends Knobset
The Sends knobset displays the current channel send options.
 The Soft Key shows the send destination.
 The knob controls send level. Pressing the knob top sets the send level knob to its
default value.
 The Select key switches between pre fader (off—unlit) and post fader (on—lit)
modes.
 The On key switches the bypass state of the send.
 Pressing both Page keys simultaneously enters Send Configuration mode (see the
following section).
 Pressing the Back key returns to the top-level knobset
Send Configuration Knobset
In Send Configuration mode, a list of the first eight Send slots is displayed.
When you touch the knob, the Soft Key shows the send level (provided the send slot is
already assigned to a bus).
To change a send destination:
1 Select the desired Send slot by pressing the respective Soft Key or knob top.
The first eight Send destinations are displayed. You can use the right Page key (of the
left Page key set) to display further Send destinations (buses).
2 Choose the desired destination by pressing the respective Soft Key or knob top.
To return to send editing mode:
m Press the Back key.
Pan/Surround Editing Knobset
This knobset displays the Pan parameter unless Surround mode is active on the
channels.
On channels where Surround Mode is active, this knobset displays:
 Surround Angle
 Surround Diversity
 LFE Level
 Surround X (left/right)
 Surround Y (front/back)
 Spread
 Center Level
Press the Back key to return to the top-level knobset. Pressing a knob top sets the
controlled parameter to its default value.