10.6

67Logic Pro Instruments
8. Switch rule 2 from Always to Keyswitch.
9. Leave the first range field for rule 2 set to Snap1, and change the second range field to
Snap7.
10. Click the “+” symbol at the top of the Group section, and choose Import.
11. Select a sample (or multiple samples) representing the second of your round robin
variations, and import (the import mode is automatically set to match the existing
group).
Alchemy again analyzes each sample and adds all zones to a group named Group 2.
12. Click the Rule field below Group 2, and change it from Always to Round Robin.
It is automatically assigned the number 2 in the sequence, and a second rule (set to
Always) is added below.
13. Switch rule 2 from Always to Keyswitch.
14. Set the first Range field for rule 2 to Snap8. The second field is automatically set to the
same value.
Played notes only trigger zones in Group 1 unless the Transform pad is at position 8, in
which case Groups 1 and 2 play alternately, in a round robin fashion.
15. Repeat steps 10 to 14 as needed to configure a group for each further variation you
require.
Logic Pro Alchemy inspector zone controls
Source components are shown only in advanced view. Click the Advanced button to
switch to advanced view, then click the A/B/C/D button to view detailed parameters for the
selected source.
The source edit window is opened by clicking the Edit button on any source subpage. Click
the close window icon (X) at the top right to close the window.
The source inspector is divided into three main parameter groupings: global and source
parameters, group parameters, and zone parameters. See Logic Pro Alchemy inspector
global controls and Logic Pro Alchemy inspector group controls.