10.6

538Logic Pro Instruments
Increase stereo breadth and chorus in Sculpture
To give the very dry-sounding “0001 raw pad” setting a little more stereo breadth and
chorus effect, modulate the Pickup positions, and assign them to the left and right
channels.
1. In Logic Pro, load the “0001 raw pad” setting.
2. Drag the Spread Pickup semicircle upward until the light blue dots come to rest near the
line that separates both semicircles.
This separates the stereo pan positions of the Pickups.
3. Click the 1 and 2buttons to activate both of the modulation links in LFO1.
4. For the first link, choose PickupA Position from the Target pop-up menu, and then drag
the amt slider to a small positive value of about 0.03Hz to modulate the position of
PickupA.
5. For the second link, choose PickupB Position from the Target pop-up menu, and then
drag the amt slider to a small negative value of about −0.03Hz to modulate the position
of PickupB.
You can hear a pleasant beating or chorus effect in the sound, which makes it broader
and more full, alleviating the unpleasant, dry character. Another unpleasant aspect
is that the sound is too strong in the mid frequency range and could use some
equalization. You can use the BodyEQ to correct this.
6. Activate the BodyEQ, and experiment with the Lo Mid Hi model—the standard setting.
Try reducing Mid to −0.5 and dragging the Mid Frequency slider to 0.37.
7. To give the pad a little depth, activate the Delay. Set the Delay Time to 1/4 and adjust
the Xfeed knob to 30%.