10.6

488Logic Pro Instruments
Logic Pro Sculpturenote-on random modulators
The two note-on random sources are intended for random variations between different
notes or voices. Values are randomly generated for each note and remain constant until
the voice is released. Such randomizations are useful for adding interest or thickening
the sound when you play polyphonically. Note-on random is also useful for emulating the
periodic fluctuations that a musician introduces when playing an instrument—even when
repeating the same note.
Note-on Random parameters
• On/Off buttons (1 and 2): Turn note-on random modulation on or off.
• Target pop-up menus: Choose the modulation target—the parameter that is randomly
modulated when a note is played.
• Amount sliders: Set the amount, or strength, of modulation.
Logic Pro Sculpture velocity modulators
The excite objects and the filter have dedicated velocity sensitivity controls. Many other
modulation routings also allow you to select velocity as a via source.
In some cases, however, it may be useful to directly control other synthesis core
parameters by velocity. This can be done in this section—where two independent target/
amount/velocity curve slots are available.
Velocity modulator parameters
• On/Off buttons (1 and 2): Turn velocity modulation on or off.
• Target pop-up menus: Choose the target parameter that you want to modulate with
velocity.
• Amount sliders: Set the amount, or strength, of modulation.