10.6

470Logic Pro Instruments
Logic Pro Sculpture spread controls
Although they are not found in the actual Pickup display, two additional pickup parameters
are available to the right of the Material Pad.
Key/Pickup Spread parameters
• Key Spread button: Drag vertically to set the amount of panning (pan position) by MIDI
note number. Depending on settings, the farther up or down the keyboard you play, the
more the voice is panned left or right. Two lines in the ring that surrounds the Spread
parameters indicate values.
• Pickup Spread button: Drag vertically to spread the two pickups across the stereo or
surround base. Two dots in the ring that surrounds the Spread parameters indicate
values.
In surround instances, these two parameters can be affected by the Surround Range
parameter. For more information, see Sculpture surround range and diversity.
Tip: You can create animated width and chorus effects by modulating the Pickup
Position parameters with an LFO or other modulator.
Logic Pro Sculpture global parameters
These are found across the top of the Sculpture interface, unless otherwise specified.
Global parameters
• Glide Time field: Set the time required to slide from the pitch of one played note to
another. The Glide parameter behavior depends on the keyboard mode you choose.
• If you set the keyboard mode to Poly or Mono and set Glide to a value other than 0,
portamento is active.
• If you choose Legato and set Glide to a value other than 0, you need to play legato
(press a new key while holding the old one) to activate portamento. If you don’t play
in a legato style, portamento won’t work. This behavior is also known as fingered
portamento.
• Tune field: Fine-tune the entire instrument, in cents. A cent is 1/100th of a semitone.