10.6

444Logic Pro Instruments
Within each group mapping area (notes and velocities), zones can’t overlap. When you
force an overlap by dragging zones one above the other within the same group, the Key
Mapping Editor automatically cuts zones in order to make space for other zones. This
allows you to add zones or delete mapped areas without having to edit all affected zones
directly. You can protect either the selected or unselected zones when dragging zones.
Move one or more zones by dragging
In the Logic Pro Sampler Key Mapping Editor:
• Drag the zone to the target Key Mapping Editor position.
• Shift-click or drag (from an empty area outside any zone) to select multiple zones, and
drag them to the target Key Mapping Editor position.
Move one or more selected zones to the left or right with a key command
In the Logic Pro Sampler Key Mapping Editor:
• Select one or more zones, then use one of the following key commands:
• Shift Selected Zone(s)/Group(s) Left: Option-Left Arrow key
• Shift Selected Zone(s)/Group(s) Right: Option-Right Arrow key
Restrict zone dragging to one direction
In the Logic Pro Sampler Key Mapping Editor:
• Press and hold the Command key to restrict movement to the initial horizontal or
vertical drag direction.
Change the root key when moving a zone
The default behavior when dragging a zone to a key in the Key Mapping Editor is set with
the “Always Move Root Key with Zone” option in the Zone menu.
In the Logic Pro Sampler Key Mapping Editor do one of the following:
• Drag the zone. If the “Always Move Root Key with Zone” option in the Zone menu is not
active, press and hold Option-Command while dragging the zone.
• Select a zone, then use one of the following key commands: